| Size |
120 cm |
| Controls |
3S+2B Touch Control |
| Total Absorption |
317 W |
| Voltage |
220 - 240W |
| Lighting |
Stripe LED 1 x7W |
| Finishes |
Stainless Steel |
| Duct Size |
150mm |
| Noise Level |
43-54 db(A) |
| Booster Airflow |
300-1000 m3/h |
| Version |
Duct Out |
| Energy Class (EU) |
- |
| ACCESSORIES |
|
| Charcoal Filter |
CFC0141529 |
| Long Life Filter |
CFC0141725 |
|
|
| MODEL |
|
| THIN/IX/A/60 |
PRF0144970 |
THIN/IX/A/70
|
PRF0144971
|
THIN/IX/A/90
|
PRF0144969
|
THIN/IX/A/120
|
PRF0144972
|
DOWNLOAD
Instruction Menu
T1. Light ON/OFF button
T2 . Decrease intake speed / motor off button
L1. Speed indicator LED on
T3. Motor on / increase intake speed button
T4 . "BOOST” – intensive speed - function button
T1 : Light ON/OFF button to turn the light on and off
T2 : Decrease speed / motor off button press the decrease the intake power, until the extractor hood
is turned off. press and hold to turn the hood off directly.
L1: Speed indicator LED on the central LEDs light up according to the intake speed active/used
![]()
1st intake speed active
![]()
2nd intake speed active
![]()
3rd intake speed active
T3: Increase speed button press to turn the hood on press to increase the intake power.
T4: "BOOST” – intensive speed - function button press T4 to activate the intensive intake speed “BOOST 1”, timed for 30 minutes this prolonged timing has been designed to guarantee a useful cooking time when a high smoke content is produced while cooking
Note : after the 30 minutes, the hood will go back to the previously set intake speed *** with the motor on “BOOST 1”, press T4 again to activate the intensive intake speed “BOOST 2”, timed for 7 minutes
Note : after the 10 minutes, the hood will go back to the previously set intake speed ***
Note : press T4 again, during the 7 minutes, to go back to the previously set intake speed ***
Reset filter saturation indicator:
Press and hold button "T3", LED (L1) turns on and off (depending on the type of filter being reset, the indicator lights flash together or turn on in sequence); an acoustic signal will confirm the operation.
Activation of filter saturation indicator
Note: this operation must be performed with the hood off.
- Grease filter
This indicator is normally activated 1st prolonged press of buttons "T2" and "T3".
If the indicator is active, button "T3" turns on press button "T2", to deactivate it.
If the indicator is not active, button turns on press button "T3", to activate it.
- Active carbon filter
This indicator is normally deactivated 2nd prolonged press of buttons "T2" and "T3".
If the indicator is active, button "T3" turns on press button "T2" , to deactivate it
If the indicator is not active, button turns on press button "T3", to activate it
