| Size |
60/70/90/120 cm |
| Controls |
3S+2B Touch Control |
| Total Absorption |
317 W |
| Voltage |
220 - 240W |
| Lighting |
Stripe LED 1 x7W |
| Finishes |
Stainless Steel |
| Duct Size |
150mm |
| Noise Level |
43-54 db(A) |
| Booster Airflow |
300-1000 m3/h |
| Version |
Duct Out |
| Energy Class (EU) |
- |
All the technical data are based on manufacturer Italy 🇮🇹 Elica latest catalogues or data sheets, The airflow data is measured by factory lab. at the motor outlet point MAMOP* it is a Free Motor Blower Value measured at the motor outlet point (MAMOP*) the EU testing method with long exhaustion tube and measure at the end of exhaust point, All the cooker hoods and appliances specifications are subject to stock model specifications or factory latest update. Please check the final offer from our quotation or offer to confirm the final specifications.
所有技術資料節錄自意大利🇮🇹生產商Elica S.p.A 最新產品目錄取得。所有 Elica 油煙機風速量度標準是根據摩打出風口量度 @MAMOP* 而歐洲測試 EN 是加上長管導測試標準，所有規格廠方會恆常更新，我們會盡量更新準確資料，客人請參考購買貨物時規格， 貨物規格按現貨規格或訂貨廠方最新更新為準。
*MAMOP - airflow measure at the motor outlet point
*MAMOP-排風標準,在摩打出風口位量度
| ACCESSORIES |
|
| Charcoal Filter |
CFC0141529 |
| Long Life Filter |
CFC0141725 |
|
|
| MODEL |
|
| THIN/IX/A/60 |
PRF0144970 |
THIN/IX/A/70
|
PRF0144971
|
THIN/IX/A/90
|
PRF0144969
|
THIN/IX/A/120
|
PRF0144972
|
DOWNLOAD
Instruction Menu
T1. Light ON/OFF button
T2 . Decrease intake speed / motor off button
L1. Speed indicator LED on
T3. Motor on / increase intake speed button
T4 . "BOOST” – intensive speed - function button
T1 : Light ON/OFF button to turn the light on and off
T2 : Decrease speed / motor off button press the decrease the intake power, until the extractor hood
is turned off. press and hold to turn the hood off directly.
L1: Speed indicator LED on the central LEDs light up according to the intake speed active/used
1st intake speed active
2nd intake speed active
3rd intake speed active
T3: Increase speed button press to turn the hood on press to increase the intake power.
T4: "BOOST” – intensive speed - function button press T4 to activate the intensive intake speed “BOOST 1”, timed for 30 minutes this prolonged timing has been designed to guarantee a useful cooking time when a high smoke content is produced while cooking
Note : after the 30 minutes, the hood will go back to the previously set intake speed *** with the motor on “BOOST 1”, press T4 again to activate the intensive intake speed “BOOST 2”, timed for 7 minutes
Note : after the 10 minutes, the hood will go back to the previously set intake speed ***
Note : press T4 again, during the 7 minutes, to go back to the previously set intake speed ***
Reset filter saturation indicator:
Press and hold button "T3", LED (L1) turns on and off (depending on the type of filter being reset, the indicator lights flash together or turn on in sequence); an acoustic signal will confirm the operation.
Activation of filter saturation indicator
Note: this operation must be performed with the hood off.
- Grease filter
This indicator is normally activated 1st prolonged press of buttons "T2" and "T3".
If the indicator is active, button "T3" turns on press button "T2", to deactivate it.
If the indicator is not active, button turns on press button "T3", to activate it.
- Active carbon filter
This indicator is normally deactivated 2nd prolonged press of buttons "T2" and "T3".
If the indicator is active, button "T3" turns on press button "T2" , to deactivate it
If the indicator is not active, button turns on press button "T3", to activate it
